Control Systems MCQs — Electrical Engineering
3 practice MCQs
The correct answer is marked on every question, with its full explanation.
Electrical EngineeringControl Systems PPSC FPSC NTSID: NWG-026
In a control system, what is the main job of feedback?
- ATo compare the actual output with the desired output and correct any difference. ✓ Correct answer
- BTo supply power to the machine.
- CTo switch the machine off permanently.
- DTo increase the size of the machine.
✓ Correct answer: To compare the actual output with the desired output and correct any difference.
Full explanation
Feedback exists 'To compare the actual output with the desired output and correct any difference.' For example, a thermostat uses feedback to keep a room at the set temperature. Why the others are wrong: 'To supply power to the machine.' — power comes from the power supply. 'To switch the machine off permanently.' — feedback controls a machine; it does not switch it off for good. 'To increase the size of the machine.' — feedback does not change the size of a machine.
Electrical EngineeringControl Systems PPSC FPSC NTSID: ELE-002
What is an open-loop control system?
- AA system that uses feedback to correct errors
- BA system with no input at all
- CA system that only works at night
- DA system with no feedback from the output ✓ Correct answer
✓ Correct answer: A system with no feedback from the output
Full explanation
An open-loop system sends a command to the output but never checks the result, so it is a system with no feedback from the output. Why the others are wrong: A system that uses feedback to correct errors — that describes a closed-loop system, not an open-loop one. A system that only works at night — the time of day has nothing to do with open-loop control. A system with no input at all — an open-loop system has an input; it is the feedback that is missing.
Electrical EngineeringControl Systems PPSC FPSC NTSID: ELE-007
What is a closed-loop control system?
- AA system that only works during the day
- BA system that has no input at all
- CA system that never changes its output
- DA system that uses feedback to correct errors ✓ Correct answer
✓ Correct answer: A system that uses feedback to correct errors
Full explanation
A system that uses feedback to correct errors. A closed-loop system measures its output, compares it with the wanted output, and corrects any difference. Why the others are wrong: 'A system that has no input at all' — every control system has an input; a closed-loop system also has feedback. 'A system that only works during the day' — the time of day has nothing to do with how a control system works. 'A system that never changes its output' — a closed-loop system changes its output to reach the wanted value.
Practise these MCQs interactively →
← Electrical Engineering MCQs